Radiator Server Documentation — v10.34.1
Application log message index
Lists documented application log messages.
Documented application log messages, grouped by normal log level.
Error
- Application configuration not found, new initialized
- Closing RADIUS TLS connection before parsing without RADIUS/1.1 authentication evidence
- Closing RADIUS TLS request connection without RADIUS/1.1 authentication evidence
- Closing RADIUS TLS reverse-reply connection without RADIUS/1.1 authentication evidence
- Failed to reconnect SQLite pools after deployment, server restart required
- Installing configured logger failed
- Loading configuration failed
- Management-requested shutdown failed
- RADIATOR_NO_RECOVERY=1 is set, exiting
- Restart failed
- Signal-requested shutdown failed
Warn
- --- SERVER RUNNING IN RECOVERY MODE ---
- Cannot add dictionary VALUE for unknown attribute
- Configuration warning
- CRL file contains multiple CRLs; only the first is used. Use crl-directory to load multiple CRLs.
- Deprecated configuration syntax
- Disable service control command received
- Enable service control command received
- Encountered unknown private key type, skipping
- Failed to add Radius dictionary attribute
- Failed to deserialize RADIATOR_INITIAL_SESSIONS
- Failed to refresh licenses after deployment
- Inline CRL content contains multiple CRLs; only the first is used.
- Restart application control command received
- Running debug build
- Shutdown application control command received
Info
- Activating non-conformant unprotected Diameter TCP adjacency
- Activating non-conformant unprotected Diameter TCP listener
- Adding an AAA logger
- Application restarting
- Application shutting down
- Applying updated application logger configuration
- Closed SQLite pools before deployment
- Closing SQLite pool before deployment
- Connected syslog TCP backend
- Connected syslog TLS backend
- Creating configuration backup
- Creating LDAP connection pool
- Creating SQLite backend backup
- Default dictionary not found, continuing without dictionary
- Deployment done
- Http management is disabled or not configured
- HTTP management server stopped listening
- HUP signal received
- Initializing pending configuration: copying config directory
- INT signal received
- Licenses refreshed after deployment
- Loading configuration done
- Loading configured application loggers
- Management HTTP server listening
- Management HTTPS server listening
- Migrations applied successfully
- New license key added
- No dictionary defined, loading default dictionary
- Process information
- Radiator UI is disabled - no directory or embedded files available
- RadiatorDB GC completed
- Reconnected SQLite pools after deployment
- Reconnecting SQLite pool after deployment
- Reloaded application loggers
- Reloading aaa logger configuration
- Reloading aaa loggers
- Reloading application loggers
- Reopened syslog backend
- Restored sessions from RADIATOR_INITIAL_SESSIONS
- Rotated AAA file logger
- Rotated application file logger
- Scheduler stopping: all schedules are exhausted
- Server recovered
- Starting HTTP service
- Starting management/API
- Starting radiator server
- Starting Radius TCP service
- Starting TACACS+ service
- Successfully initialized pending configuration with baseline snapshot
- TERM signal received
- Updating an AAA logger
- Using UI files from directory
- USR1 signal received
- USR2 signal received and ignored
- Will apply SQLite backend migrations
Debug
- /ready(SERVICE_DISABLED)
- /ready(SERVICE_UNAVAILABLE)
- A finalized RADIUS packet is immutable and cannot be staged again
- AAA assertion failed
- AAA backend not found
- AAA debug context unsupported
- AAA error action triggered
- AAA final pipeline result error
- AAA log formatting failed
- AAA logger unavailable
- AAA Pipeline error
- AAA reject-errors protocol context missing
- AAA reject-errors protocol unsupported
- AAA reply action failed
- AAA reply failed
- AAA rewrite assignment failed
- AAA rewrite produced invalid UTF-8
- AAA script execution failed
- AAA syslog overflow file enqueued log
- AAA syslog overflow file not configured; dropping log
- AAA syslog overflow file worker task failed
- AAA syslog overflow queue unavailable; dropping log
- AAA syslog queue closed; dropping log
- AAA syslog queue full; dropping log
- AAA syslog worker task failed
- AAA variable modification failed
- AAA wait-pipe I/O failed
- AAA wait-pipe path is not a FIFO
- AAA wait-pipe timed out
- Accepted Diameter TLS transport
- Accepting Diameter TCP connection failed
- Accepting HTTP client connection
- Accepting HTTP connection failed
- Accepting HTTP TLS client connection failed
- Accepting HTTP TLS client connection timed out
- Accepting HTTP TLS client connection
- Accepting HTTPS connection failed
- Accepting HTTPS management connection
- Accepting Management HTTP connection failed
- Accepting Management HTTPS connection failed
- Accepting Radius TCP client connection
- Accepting Radius TCP connection failed
- Accepting Radius TLS client connection failed
- Accepting Radius TLS client connection
- Accepting Radius TLS connection failed
- Accepting TACACS+ TCP client connection
- Accepting TACACS+ TCP connection failed
- Accepting TACACS+ TLS client connection failed
- Accepting TACACS+ TLS client connection timed out
- Accepting TACACS+ TLS client connection
- Accepting TACACS+ TLS connection failed
- Admitting Diameter connection failed
- Admitting inbound Diameter connection failed
- An error occurred during HTTP client lookup
- An error occurred during HTTPS client lookup
- An error occurred during Radius TCP client lookup
- An error occurred during Radius TLS client lookup
- An error occurred during Radius UDP client lookup
- An error occurred during Reverse Radius client lookup
- Application syslog overflow file enqueued log
- Application syslog overflow file not configured; dropping log
- Application syslog overflow file worker task failed
- Application syslog overflow queue unavailable; dropping log
- Application syslog queue closed; dropping log
- Application syslog queue full; dropping log
- Application syslog worker task failed
- Applying Diameter listener TCP keepalive failed
- Applying RADIUS TCP keepalive failed
- Applying RADIUS TLS keepalive failed
- Applying TACACS+ TCP keepalive failed
- Applying TACACS+ TLS keepalive failed
- Authentication response expression failed
- Auto-loading licenses from default directory
- Backend action timed out
- Backend has no available connections
- Backend is not monitoring JSON file
- Backend pool full
- Backend query failed
- Backend server error
- Backend status DEGRADED
- Backend status OFFLINE
- Backend status OK
- Backend status ONLINE
- Backend worker server error
- CA certificate added to TLS context
- Cache message handler failed unexpectedly
- Certificate added to TLS context
- Certificate verification handler channel closed unexpectedly
- Certificate verification handler failed unexpectedly
- Checking Diameter adjacency recovery eligibility failed
- Checking Diameter persistent reconnect policy failed
- Clearing expired session
- Client certificate accepted by AAA verification policy despite rustls rejection
- Closed Radius backend server connection
- Closing an idle Radius backend server connection
- Closing idle exclusive LDAP connection
- Closing idle shared LDAP connection
- Closing Radius backend connection after active polling failed
- Closing Radius backend server degraded connection
- Closing Radius TCP/TLS client connection after a reply write failed
- Closing Radius TCP/TLS client connection after a reverse query write failed
- Closing Radius TCP/TLS connection after request acceptance failed
- Closing Radius TCP/TLS connection after response authentication failed
- Closing RADIUS/1.1 backend connection after receiving a duplicate outstanding Token
- Closing Radius/1.1 connection after receiving a duplicate outstanding Token
- Completing inbound Diameter capability exchange failed
- Configured LDAP backend server
- Configured MySQL backend server
- Configured MySQL connect options
- Configured policy not found
- Configured PostgreSQL backend server
- Configured PostgreSQL connect options
- Configured RADIUS policy not found; dropping packet
- Configured TACACS+ policy not found; dropping packet
- Configuring MySQL backend
- Configuring MySQL pool
- Configuring PostgreSQL backend
- Configuring PostgreSQL pool
- Configuring RadiatorDB node pool
- Connecting syslog TCP backend failed
- Connecting syslog TLS backend failed
- Connecting syslog TLS socket failed
- Creating SQLite copy via VACUUM INTO
- CRL directory snapshot changed
- CRL is expired; rustls will reject handshakes unless allow-stale is set
- CRL is fresh
- CRL is nearing expiry
- Database connection acquisition timed out
- Debug context
- Decoding accepted RADIUS UDP datagram failed
- Decoding received RADIUS UDP datagram failed
- Deinitializing LSA failed
- Diagnostic RADIUS attribute cannot be transformed
- Diameter application routing task failed
- Diameter capability-exchange task failed
- Diameter connection terminated after a peer protocol failure
- Diameter connection terminated with an I/O or framing error
- Diameter initiator operation completed after its caller stopped waiting
- Discarding a Radius UDP backend datagram because its reverse-request validation queue is full
- Discarding an invalid Radius UDP backend datagram
- Discarding an unmatched Radius TCP/TLS response
- Discarding Diameter answer that failed exact request correlation
- Discarding oversized RADIUS backend stream packet
- Discarding oversized RADIUS backend UDP packet
- Discarding unknown or late Diameter answer identifier
- Disconnected connection not found
- Dispatching processed RADIUS request result failed
- Dispatching received RADIUS reply to backend failed
- EasyPSK key expression returned a map
- Error accepting HTTPS management connection
- Error capturing key log
- Error reloading JSON file backend
- Error repopulating IpMap backend
- Error serving HTTP connection
- Error serving HTTPS connection. HTTP protocol mismatch
- Error watching JSON file
- Error while extracting template description
- Error writing to key log file
- Failed to add license key
- Failed to calculate next scheduled tick; will retry
- Failed to calculate next x509-directory refresh; using fallback delay
- Failed to clear expired sessions
- Failed to create UI settings directory
- Failed to flush AAA file logger
- Failed to flush AAA syslog overflow file after batch
- Failed to flush AAA syslog overflow file during shutdown
- Failed to flush application file logger
- Failed to flush application syslog overflow file after batch
- Failed to flush application syslog overflow file during shutdown
- Failed to inspect CRL freshness
- Failed to parse UI settings JSON, using empty settings
- Failed to process TACACS+ TLS client certificate
- Failed to process TLS client certificate
- Failed to read UI settings file, using empty settings
- Failed to rebuild client cert verifier with refreshed CRLs; reusing previous one
- Failed to rebuild client certificate verifier from directory; reusing previous one
- Failed to rebuild server cert verifier with refreshed CRLs; reusing previous one
- Failed to refresh CRL directory snapshot
- Failed to send a RADIUS/1.1 resource-unavailable response for a reverse request
- Failed to send JSON file reload message
- Failed to send reverse reply over Radius backend connection
- Failed to send systemd notify READY=1
- Failed to write AAA logs
- Failed to write AAA syslog overflow file
- Failed to write AAA syslog
- Failed to write application logs
- Failed to write application syslog overflow file
- Failed to write application syslog
- Failover attempts failed
- Failover min-connections maintenance disabled
- Failover min-connections maintenance enabled
- Failover min-connections maintenance errored
- Failover min-connections maintenance failed
- Forwarding malformed terminal EAP from a RADIUS backend
- Found working backend server after error
- Handled Radius Status-Server
- Heart beat
- HOTP counter exhausted
- HTTP @pre-client lookup failed; using static clients
- HTTP backend action timed out
- HTTP backend request failed
- HTTP backend request timed out
- HTTP basic authentication stored credential is unusable
- HTTP client connection error
- HTTP server listening
- HTTPS @pre-client lookup failed; using static clients
- HTTPS server listening
- Ignored file with unsupported configuration suffix
- Ignored Radius Status-Server
- Ignoring a RADIUS backend response that does not match its finalized request
- Ignoring a Radius TCP/TLS response that does not match its finalized request
- Ignoring invalid deployment baseline snapshot
- Ignoring invalid snapshot file
- Ignoring oversized RADIUS UDP datagram
- Ignoring packet due to ip-accept
- Ignoring PEAP inner EAP-Response with a mismatched Identifier
- Ignoring PEAP inner EAP-Response without a pending request
- Init pipeline error
- Init pipeline executed
- Internal backend message forwarding failed
- Internal IpMap message reply failed
- Internal message forwarder failed
- Internal message handler failed
- Internal message handler reply failed
- Invalid syslog TLS server name
- IpMap populate actor closed unexpectedly
- IpMap repopulated
- Joining Diameter pending-request expiry worker failed
- Joining the terminated Diameter connection failed
- JSON file loaded
- LDAP backend setup completed
- LDAP connection pools are closed, stopping monitor task
- License config error
- License directory configuration failed
- License key expired
- License key removed
- Loaded license key is already expired
- Loaded users from file
- Loading aaa logging configuration
- Loading backend configuration
- Loading cache configuration
- Loading capture configuration
- Loading certificate configuration
- Loading clients configuration
- Loading Diameter dictionary configuration
- Loading Http management configuration
- Loading init pipeline configuration
- Loading license key
- Loading licenses from directory
- Loading policy configuration
- Loading Radius dictionary configuration
- Loading script configuration
- Loading server configuration
- Loading template configuration
- Loading timer configuration
- Management HTTP handler returned an invalid error status
- Management HTTP post policy failed
- Management HTTP request authentication errored
- Management HTTP request rejected
- Management HTTP server request errored
- Management HTTP stored credential is unusable
- Management policy stored credential is unusable
- Min-connections maintenance task did not meet pool floor requirements
- Min-connections maintenance task is progressing toward pool floor
- Min-connections maintenance task successfully established required connections
- Monitoring JSON file for changes
- MySQL backend server error
- MySQL backend setup completed
- Named AAA pipeline not found
- Nested AAA pipeline not found
- New Radius TCP backend connection
- New Radius TLS backend connection
- New Radius UDP backend connection
- No AAA handler found for policy
- No EAP policy found
- No license configured, using default license directory
- No matching Radius client found for Reverse Radius request
- No policy handler matched request
- No RADIUS reverse connection matched the selection policy
- No valid license key files found in configured directory
- Opening syslog backend failed
- OTP authentication response is not UTF-8
- OTP authentication response type unsupported
- OTP secret decoding failed
- OTP secret empty
- OTP secret missing
- OTP secret too short
- PEAP cryptobinding used zero ISK because the inner method did not provide an MSK
- Persistent Diameter adjacency connection cycle failed
- Persistent Diameter adjacency is ineligible until configuration or peer state changes
- PostgreSQL backend server error
- PostgreSQL backend setup completed
- Processing rotated logs failed
- Published configuration changes
- Publishing Diameter adjacency ineligibility failed
- Publishing Diameter reconnect suspension failed
- Queueing rotated log maintenance failed
- RadiatorDB each control used outside document iteration
- RadiatorDB GC failed
- RadiatorDB GC scheduled run failed
- Radius @pre-client lookup failed and no static client matched
- Radius @pre-client lookup failed; selected a static client
- RADIUS attribute does not support a tag
- RADIUS attribute value exceeds packet capacity
- Radius backend connection attempt error
- Radius backend connection Status-Server probe timed out
- RADIUS backend DNS resolution timed out
- Radius backend incoming frame handling failed
- Radius backend min-connections connect failed
- Radius backend min-connections connect scheduling failed
- RADIUS backend response authentication failed
- RADIUS backend response omitted the required Message-Authenticator
- Radius backend reverse validation failed
- Radius backend server connection closed by peer
- Radius backend server connection has no available correlation identifiers
- RADIUS backend TCP connection timed out
- RADIUS backend TLS handshake timed out
- RADIUS boolean attribute conversion failed
- RADIUS dictionary attribute was not found
- RADIUS exchange state rejected an operation
- Radius packet type not supported for requests
- RADIUS policy path is invalid
- RADIUS policy value is incompatible with the attribute datatype
- RADIUS policy value type is not supported for an attribute
- RADIUS policy variable access is not allowed
- RADIUS reverse request receiver closed before validating the packet
- Radius reverse-request validation timed out
- RADIUS stream @pre-client lookup failed; using static clients
- RADIUS stream connection closed after frame read error
- RADIUS stream connection closed after malformed packet
- RADIUS TCP connection rejected while service is not ready
- RADIUS TCP server starting
- Radius TCP/TLS client connection closed
- Radius TCP/TLS client connection timed out
- Radius TCP/TLS client sent an invalid packet
- RADIUS TLS client handshake timed out
- Radius TLS connection handler failed
- RADIUS TLS connection rejected while service is not ready
- RADIUS TLS server starting
- Radius UDP packet from unknown client
- Radius UDP packet worker stopped unexpectedly
- Radius UDP server starting
- Reading LDAP TLS peer certificate failed
- Reading Radius dictionary file
- Received a Radius packet without a required Message-Authenticator
- Received a Radius request with incompatible acceptance evidence
- Received an invalid Radius Authenticator
- Received an unexpected Radius Message-Authenticator
- Received encrypted TACACS+ packet for a client configured with 'secret none'
- Received encrypted TACACS+ packet for a server configured with 'obfuscation disabled'
- Received incomplete RADIUS UDP packet
- Received invalid encrypted TACACS+ packet or incorrect secret
- Received invalid TACACS+ packet
- Received unencrypted TACACS+ packet for a client with a configured shared secret
- Received unexpected TACACS+ authentication continue without pending state
- Recycling exclusive LDAP connection failed
- Recycling shared LDAP connection failed
- Refreshing client certificate verifier from directory
- Refusing to verify password: stored credential is unusable
- Registering SQLite pool in global registry
- Rejected TACACS+ frame exceeding configured max-packet-size
- Rejecting Diameter connection because the routing-domain connection limit is full
- Rejecting Diameter connection by ip-accept list
- Rejecting HTTP client connection: TCP not allowed
- Rejecting HTTP connection from an unknown source
- Rejecting HTTPS client connection: TLS not allowed
- Rejecting HTTPS connection from an unknown source
- Rejecting inbound Diameter connection failed
- Rejecting Management HTTP connection.
- Rejecting Management HTTPS connection.
- Rejecting non-TLS connection. Expecting TLS ClientHello byte 0x16
- Rejecting non-TLS TACACS+ connection. Expecting TLS ClientHello byte 0x16
- Rejecting proxied Diameter connection due to PROXY header error
- Rejecting proxied Radius TCP connection due to PROXY header error
- Rejecting proxied Radius TLS connection due to PROXY header error
- Rejecting proxied TACACS+ TCP connection due to PROXY header error
- Rejecting proxied TACACS+ TLS connection due to PROXY header error
- Rejecting Radius TCP client connection: protocol not allowed
- Rejecting Radius TCP connection by ip-accept list
- Rejecting Radius TCP connection from unknown client
- Rejecting Radius TLS client connection: protocol not allowed
- Rejecting Radius TLS connection because the client omitted required ALPN
- Rejecting Radius TLS connection by ip-accept list
- Rejecting Radius TLS connection from unknown client
- Rejecting Radius TLS connection with unsupported ALPN
- Rejecting TACACS+ TCP client connection due to ambiguous client selection
- Rejecting TACACS+ TCP connection by ip-accept list
- Rejecting TACACS+ TCP connection from unknown client
- Rejecting TACACS+ TLS client connection after certificate processing
- Rejecting TACACS+ TLS client connection due to ambiguous client selection
- Rejecting TACACS+ TLS connection by ip-accept list
- Rejecting TACACS+ TLS connection from unknown client
- Reloading AAA logger failed
- Reloading application loggers failed
- Removing Radius backend server offline connection
- Reply received without a finalized pending Radius request
- Request rejected because licensed maximum request count was reached
- Request rejected because the protocol is not licensed
- Responding 503 during shutdown
- Retrying failover server attempt
- Retrying LDAP search after connection failure
- Returning a RADIUS/1.1 resource-unavailable response because the reverse-request validation queue is full
- Reverse RADIUS @pre-client lookup failed; using static clients
- Reverse request received without a registered receiver
- Rotating AAA file logger before size-limited write failed
- Rotating AAA file logger failed
- Rotating AAA syslog overflow file logger failed
- Rotating application file logger before size-limited write failed
- Rotating application file logger failed
- Rotating application syslog overflow file logger failed
- Routing Diameter application request failed
- RSA AM HTTP backend authentication returned an error
- SASL external LDAP bind failed
- Scheduled IpMap populate retry
- Scheduler tick task panicked
- Script runner handler channel closed unexpectedly
- Script runner handler failed unexpectedly
- Selected RADIUS attribute is malformed
- Sending cache handler decoded-message reply failed
- Sending cache handler error reply failed
- Sending Radius Status-Server reply failed
- Sending Radius UDP response failed
- Sending RFC 5176 validation failure reply failed
- Sending status handler decoded-message reply failed
- Sending status handler error reply failed
- Server certificate accepted by AAA verification policy despite rustls rejection
- Server entered failed state
- Server LDAP bind failed
- ServerStatusReceived for unknown connection
- Service not ok, ignoring packet
- Service not ok, rejecting Diameter connection
- Service not ok, rejecting HTTP connection
- Service not ok, rejecting HTTPS connection
- Session auth failed: session not found or expired
- Session auth failed: username mismatch between pipeline context and session store
- Session cleared by user
- Session created
- Session extended
- Setting failure rate violation for a backend
- Setting syslog TCP_NODELAY failed
- Skipping backend server while connection pool is recovering
- Skipping CRL directory refresh: previous refresh still running
- Skipping CRL file
- Staged RADIUS attribute missing from dictionary
- Staging RFC 5176 validation failure reply failed
- Starting NTLM auth process
- Status message handler failed unexpectedly
- Syslog format error
- Syslog write error
- TACACS+ @pre-client lookup failed, falling back to static clients
- TACACS+ connection closed after flushed reply
- TACACS+ connection closed due to an error
- TACACS+ connection closed due to frame error
- TACACS+ connection closed due to send error
- TACACS+ connection closed
- TACACS+ connection timed out
- TACACS+ packet type not handled
- TACACS+ server starting
- TACACS+ TCP connection rejected while service is not ready
- TACACS+ TLS connection handler failed
- TACACS+ TLS connection rejected while service is not ready
- TACACS+ TLS server starting
- Timer pipeline execution failed
- Timer pipeline panicked
- Timer tick skipped: previous run still in progress
- TLS handshake failed
- TLS handshake rejected by CRL
- TLS verification block not properly terminated. Missing accept; or reject; statement?
- UDP duplicate cache is at capacity
- UDP retransmission cache hit after the response transport closed
- UDP retransmission cache hit
- UDP retransmission is still in flight
- UDP socket receive error
- Unexpected RADIUS packet after request processing
- Unexpected RADIUS packet while dispatching reply
- Unexpected reply received over Radius backend server connection
- Unregistered SQLite pool from global registry
- Unsupported packet type
- Using jemalloc memory allocator
- Waiting for Diameter adjacency connection loss failed
- Waiting for RADIUS TLS client handshake data timed out
- Waiting for TACACS+ TLS client connection data timed out
- Writing DSB to a capture file failed
- Writing to a capture file failed
- Wrote process identifier
Trace
- /live
- /ready(OK)
- AAA final pipeline result
- AAA main pipeline result
- AAA pipeline action
- AAA post-pipeline result
- AAA pre-pipeline result
- Accept
- Accepted legacy TACACS+ ENABLE request with minor version 1
- Added connection
- Additional EAP-TLS fragment received from peer
- Allowing Management HTTP connection while service is not ready
- Allowing Management HTTPS connection while service is not ready
- Applied RADIUS packet compatibility handling
- Attempting server LDAP bind
- Backend errored. Trying next backend.
- Client MAC computed
- Client MAC input buffer
- CMK derived
- Created LDAP TLS connection
- Creating new exclusive LDAP connection
- Creating new shared LDAP connection
- CRL directory snapshot unchanged
- Current IMSK (zeroes)
- Current IMSK
- Database backend connection configuration
- Disconnected connection
- EAP error
- EAP message
- EAP-TLS empty request sent to peer
- EAP-TLS fragment ack received from peer
- EAP-TLS fragment received from peer
- EAP-TLS fragment sent to peer
- EAP-TLS message reassembled from peer
- EAP-TLS message sent to peer
- EAP-TTLS inner authentication complete
- EMSK derived
- EMSK S-IMCK extracted
- Error captured in try-action
- Error captured in until-action
- Failed to prepare UI settings file path
- Failed to resolve UI settings file path
- Failover server attempt failed
- Failover server attempt timed out
- HTTP backend error
- HTTP backend request details
- HTTP backend response details
- Ignore
- Ignoring a Radius TCP/TLS packet with an unknown Code
- Ignoring invalid terminal EAP carried by a RADIUS response
- Ignoring RADIUS backend frame with an unknown Code
- Ignoring terminal EAP result that does not match its RADIUS exchange
- IMSK source material
- JSON file reload request found no content changes
- Keying material ready
- LDAP bind request
- LDAP bind response
- LDAP search request
- LDAP search response
- Lua print output
- MSK derived
- MSK S-IMCK extracted
- New S-IMCK derived
- Next scheduled tick
- No config directory, returning empty pending status
- ntlm_auth request
- ntlm_auth response
- Parsed RADIUS datagram PROXY protocol header
- Parsed stream PROXY protocol header
- PEAP peer returned Result TLV Failure
- Previous S-IMCK
- RADIUS packet
- Read configuration file
- Received Diameter message
- Received HTTP backend response
- Recycling exclusive LDAP connection
- Recycling shared LDAP connection
- Reject
- Removed stale disconnected connection
- Removed trailing NUL bytes from TACACS+ request arguments
- Retrying HTTP backend request
- SASL external LDAP bind succeeded
- Sending HTTP backend request
- Sent Diameter admission answer
- Sent Diameter message
- Server LDAP bind succeeded
- Server MAC computed
- Server MAC input buffer
- Session key seed as S-IMCK
- Skipping attribute with no type or vendor
- SLO recovery: all probes succeeded, transitioning to OK
- SLO recovery: probe failed, discarding accumulated probes
- SLO recovery: probe succeeded, holding backoff for next probe
- SLO: backend fully recovered
- SQL backend operation completed
- TACACS+ packet
- TEAP outer TLVs received from peer
- Timer started
- TLS handshake complete
- TLS handshake starting
- TLS resumption rejected because EAP-TLS full authentication is required
- Unknown field in Yubico API response
- Using legacy dictionary lookup format