Radiator Server Documentation — v10.34.0
Application log message index
Lists documented application log messages.
Documented application log messages, grouped by normal log level.
Error
- Application configuration not found, new initialized
- Closing RADIUS TLS connection before parsing without RADIUS/1.1 authentication evidence
- Closing RADIUS TLS request connection without RADIUS/1.1 authentication evidence
- Closing RADIUS TLS reverse-reply connection without RADIUS/1.1 authentication evidence
- Failed to reconnect SQLite pools after deployment, server restart required
- Installing configured logger failed
- Loading configuration failed
- Management-requested shutdown failed
- RADIATOR_NO_RECOVERY=1 is set, exiting
- Restart failed
- Signal-requested shutdown failed
Warn
- --- SERVER RUNNING IN RECOVERY MODE ---
- Cannot add dictionary VALUE for unknown attribute
- Configuration warning
- CRL file contains multiple CRLs; only the first is used. Use crl-directory to load multiple CRLs.
- Deprecated configuration syntax
- Disable service control command received
- Enable service control command received
- Encountered unknown private key type, skipping
- Failed to add Radius dictionary attribute
- Failed to deserialize RADIATOR_INITIAL_SESSIONS
- Failed to refresh licenses after deployment
- Inline CRL content contains multiple CRLs; only the first is used.
- Restart application control command received
- Running debug build
- Shutdown application control command received
Info
- Adding an AAA logger
- Application restarting
- Application shutting down
- Applying updated application logger configuration
- Closed SQLite pools before deployment
- Closing SQLite pool before deployment
- Connected syslog TCP backend
- Connected syslog TLS backend
- Creating configuration backup
- Creating LDAP connection pool
- Creating SQLite backend backup
- Default dictionary not found, continuing without dictionary
- Deployment done
- Http management is disabled or not configured
- HTTP management server stopped listening
- HUP signal received
- Initializing pending configuration: copying config directory
- INT signal received
- JSON file backend content was unchanged during initial load
- Licenses refreshed after deployment
- Loaded JSON file backend
- Loading configuration done
- Loading configured application loggers
- Management HTTP server listening
- Management HTTPS server listening
- Management UI is disabled - no directory or embedded files available
- Migrations applied successfully
- New license key added
- No dictionary defined, loading default dictionary
- Process information
- RadiatorDB GC completed
- Reconnected SQLite pools after deployment
- Reconnecting SQLite pool after deployment
- Reloaded application loggers
- Reloading aaa logger configuration
- Reloading aaa loggers
- Reloading application loggers
- Reopened syslog backend
- Restored sessions from RADIATOR_INITIAL_SESSIONS
- Rotated AAA file logger
- Rotated application file logger
- Scheduler stopping: all schedules are exhausted
- Starting HTTP service
- Starting management/API
- Starting radiator server
- Starting Radius TCP service
- Starting TACACS+ service
- Successfully initialized pending configuration with baseline snapshot
- TERM signal received
- Updating an AAA logger
- Using UI files from directory
- USR1 signal received
- USR2 signal received and ignored
- Will apply SQLite backend migrations
Debug
- /ready(SERVICE_DISABLED)
- /ready(SERVICE_UNAVAILABLE)
- A finalized RADIUS packet is immutable and cannot be staged again
- AAA final pipeline result error
- AAA loop pipeline not found
- AAA Pipeline error
- AAA reply failed
- AAA syslog overflow file enqueued log
- AAA syslog overflow file not configured; dropping log
- AAA syslog overflow file worker task failed
- AAA syslog overflow queue unavailable; dropping log
- AAA syslog queue closed; dropping log
- AAA syslog queue full; dropping log
- AAA syslog worker task failed
- Accepting HTTP client connection
- Accepting HTTP connection failed
- Accepting HTTP TLS client connection failed
- Accepting HTTP TLS client connection timed out
- Accepting HTTP TLS client connection
- Accepting HTTPS connection failed
- Accepting HTTPS management connection
- Accepting Management HTTP connection failed
- Accepting Management HTTPS connection failed
- Accepting Radius TCP client connection
- Accepting Radius TCP connection failed
- Accepting Radius TLS client connection failed
- Accepting Radius TLS client connection
- Accepting Radius TLS connection failed
- Accepting TACACS+ TCP client connection
- Accepting TACACS+ TCP connection failed
- Accepting TACACS+ TLS client connection failed
- Accepting TACACS+ TLS client connection timed out
- Accepting TACACS+ TLS client connection
- Accepting TACACS+ TLS connection failed
- An error occurred during HTTP client lookup
- An error occurred during HTTPS client lookup
- An error occurred during Radius TCP client lookup
- An error occurred during Radius TLS client lookup
- An error occurred during Radius UDP client lookup
- An error occurred during Reverse Radius client lookup
- Application syslog overflow file enqueued log
- Application syslog overflow file not configured; dropping log
- Application syslog overflow file worker task failed
- Application syslog overflow queue unavailable; dropping log
- Application syslog queue closed; dropping log
- Application syslog queue full; dropping log
- Application syslog worker task failed
- Applying RADIUS TCP keepalive failed
- Applying RADIUS TLS keepalive failed
- Applying TACACS+ TCP keepalive failed
- Applying TACACS+ TLS keepalive failed
- Auto-loading licenses from default directory
- Backend action timed out
- Backend has no available connections
- Backend is not monitoring JSON file
- Backend pool full
- Backend query failed
- Backend server error
- Backend status DEGRADED
- Backend status OFFLINE
- Backend status OK
- Backend status ONLINE
- Backend worker server error
- CA certificate added to TLS context
- Cache message handler failed unexpectedly
- Certificate added to TLS context
- Certificate verification handler channel closed unexpectedly
- Certificate verification handler failed unexpectedly
- Clearing expired session
- Client certificate accepted by AAA verification policy despite rustls rejection
- Closed Radius backend server connection
- Closing an idle Radius backend server connection
- Closing idle exclusive LDAP connection
- Closing idle shared LDAP connection
- Closing Radius backend connection after active polling failed
- Closing Radius backend server degraded connection
- Closing Radius TCP/TLS client connection after a reply write failed
- Closing Radius TCP/TLS client connection after a reverse query write failed
- Closing Radius TCP/TLS connection after request acceptance failed
- Closing Radius TCP/TLS connection after response authentication failed
- Closing RADIUS/1.1 backend connection after receiving a duplicate outstanding Token
- Closing Radius/1.1 connection after receiving a duplicate outstanding Token
- Configured LDAP backend server
- Configured MySQL backend server
- Configured MySQL connect options
- Configured policy not found
- Configured PostgreSQL backend server
- Configured PostgreSQL connect options
- Configured RADIUS policy not found; dropping packet
- Configured TACACS+ policy not found; dropping packet
- Configuring MySQL backend
- Configuring MySQL pool
- Configuring PostgreSQL backend
- Configuring PostgreSQL pool
- Configuring RadiatorDB node pool
- Connecting syslog TCP backend failed
- Connecting syslog TLS backend failed
- Connecting syslog TLS socket failed
- Creating SQLite copy via VACUUM INTO
- CRL directory snapshot changed
- CRL is expired; rustls will reject handshakes unless allow-stale is set
- CRL is fresh
- CRL is nearing expiry
- Debug context
- Decoding accepted RADIUS UDP datagram failed
- Decoding received RADIUS UDP datagram failed
- Deinitializing LSA failed
- Discarding a Radius UDP backend datagram because its reverse-request validation queue is full
- Discarding an invalid Radius UDP backend datagram
- Discarding an unmatched Radius TCP/TLS response
- Discarding oversized RADIUS backend stream packet
- Discarding oversized RADIUS backend UDP packet
- Disconnected connection not found
- Dispatching processed RADIUS request result failed
- Dispatching received RADIUS reply to backend failed
- Error accepting HTTPS management connection
- Error capturing key log
- Error reloading JSON file backend
- Error repopulating IpMap backend
- Error serving HTTP connection
- Error serving HTTPS connection. HTTP protocol mismatch
- Error watching JSON file
- Error while extracting template description
- Error writing to key log file
- Failed to add license key
- Failed to calculate next scheduled tick; will retry
- Failed to calculate next x509-directory refresh; using fallback delay
- Failed to clear expired sessions
- Failed to create UI settings directory
- Failed to flush AAA file logger
- Failed to flush AAA syslog overflow file after batch
- Failed to flush AAA syslog overflow file during shutdown
- Failed to flush application file logger
- Failed to flush application syslog overflow file after batch
- Failed to flush application syslog overflow file during shutdown
- Failed to inspect CRL freshness
- Failed to parse UI settings JSON, using empty settings
- Failed to process TACACS+ TLS client certificate
- Failed to process TLS client certificate
- Failed to read UI settings file, using empty settings
- Failed to rebuild client cert verifier with refreshed CRLs; reusing previous one
- Failed to rebuild client certificate verifier from directory; reusing previous one
- Failed to rebuild server cert verifier with refreshed CRLs; reusing previous one
- Failed to refresh CRL directory snapshot
- Failed to send a RADIUS/1.1 resource-unavailable response for a reverse request
- Failed to send JSON file reload message
- Failed to send reverse reply over Radius backend connection
- Failed to send systemd notify READY=1
- Failed to write AAA logs
- Failed to write AAA syslog overflow file
- Failed to write AAA syslog
- Failed to write application logs
- Failed to write application syslog overflow file
- Failed to write application syslog
- Failover min-connections maintenance disabled
- Failover min-connections maintenance enabled
- Failover min-connections maintenance errored
- Failover min-connections maintenance failed
- Found working backend server after error
- Handled Radius Status-Server
- Heart beat
- HTTP @pre-client lookup failed; using static clients
- HTTP basic authentication stored credential is unusable
- HTTP client connection error
- HTTP server listening
- HTTPS @pre-client lookup failed; using static clients
- HTTPS server listening
- Ignored file with unsupported configuration suffix
- Ignored Radius Status-Server
- Ignoring a RADIUS backend response that does not match its finalized request
- Ignoring a Radius TCP/TLS response that does not match its finalized request
- Ignoring invalid deployment baseline snapshot
- Ignoring invalid snapshot file
- Ignoring oversized RADIUS UDP datagram
- Ignoring packet due to ip-accept
- Ignoring PEAP inner EAP-Response with a mismatched Identifier
- Ignoring PEAP inner EAP-Response without a pending request
- Init pipeline error
- Init pipeline executed
- Internal backend message forwarding failed
- Internal IpMap message reply failed
- Internal message forwarder failed
- Internal message handler failed
- Internal message handler reply failed
- Invalid syslog TLS server name
- IpMap populate actor closed unexpectedly
- IpMap repopulated
- JSON file loaded
- LDAP backend setup completed
- LDAP connection pools are closed, stopping monitor task
- License config error
- License directory configuration failed
- License key expired
- License key removed
- Loaded license key is already expired
- Loaded users from file
- Loading aaa logging configuration
- Loading backend configuration
- Loading cache configuration
- Loading capture configuration
- Loading certificate configuration
- Loading clients configuration
- Loading Diameter dictionary configuration
- Loading Http management configuration
- Loading init pipeline configuration
- Loading license key
- Loading licenses from directory
- Loading policy configuration
- Loading Radius dictionary configuration
- Loading script configuration
- Loading server configuration
- Loading template configuration
- Loading timer configuration
- Management HTTP client request errored
- Management HTTP post policy failed
- Management HTTP request authentication errored
- Management HTTP server request errored
- Management HTTP stored credential is unusable
- Management policy stored credential is unusable
- Min-connections maintenance task did not meet pool floor requirements
- Min-connections maintenance task is progressing toward pool floor
- Min-connections maintenance task successfully established required connections
- Monitoring JSON file for changes
- MySQL backend server error
- MySQL backend setup completed
- Nested AAA pipeline not found
- New Radius TCP backend connection
- New Radius TLS backend connection
- New Radius UDP backend connection
- No AAA handler found for policy
- No EAP policy found
- No license configured, using default license directory
- No matching Radius client found for Reverse Radius request
- No RADIUS reverse connection matched the selection policy
- No valid license key files found in configured directory
- Opening syslog backend failed
- OTP secret too short
- PEAP cryptobinding used zero ISK because the inner method did not provide an MSK
- PostgreSQL backend server error
- PostgreSQL backend setup completed
- Processing rotated logs failed
- Published configuration changes
- Queueing rotated log maintenance failed
- RadiatorDB GC failed
- RadiatorDB GC scheduled run failed
- Radius @pre-client lookup failed and no static client matched
- Radius @pre-client lookup failed; selected a static client
- RADIUS attribute does not support a tag
- RADIUS attribute value exceeds packet capacity
- Radius backend connection attempt error
- Radius backend connection Status-Server probe timed out
- RADIUS backend DNS resolution timed out
- Radius backend incoming frame handling failed
- Radius backend min-connections connect failed
- Radius backend min-connections connect scheduling failed
- RADIUS backend response authentication failed
- RADIUS backend response omitted the required Message-Authenticator
- Radius backend reverse validation failed
- Radius backend server connection closed by peer
- Radius backend server connection has no available correlation identifiers
- RADIUS backend TCP connection timed out
- RADIUS backend TLS handshake timed out
- RADIUS boolean attribute conversion failed
- RADIUS dictionary attribute was not found
- RADIUS exchange state rejected an operation
- Radius packet type not supported for requests
- RADIUS policy path is invalid
- RADIUS policy value is incompatible with the attribute datatype
- RADIUS policy value type is not supported for an attribute
- RADIUS policy variable access is not allowed
- RADIUS reverse request receiver closed before validating the packet
- Radius reverse-request validation timed out
- RADIUS stream @pre-client lookup failed; using static clients
- RADIUS stream connection closed after frame read error
- RADIUS stream connection closed after malformed packet
- RADIUS TCP connection rejected while service is not ready
- RADIUS TCP server starting
- Radius TCP/TLS client connection closed
- Radius TCP/TLS client connection timed out
- Radius TCP/TLS client sent an invalid packet
- RADIUS TLS client handshake timed out
- Radius TLS connection handler failed
- RADIUS TLS connection rejected while service is not ready
- RADIUS TLS server starting
- Radius UDP packet from unknown client
- Radius UDP packet worker stopped unexpectedly
- Radius UDP server starting
- Reading LDAP TLS peer certificate failed
- Reading Radius dictionary file
- Received a Radius packet without a required Message-Authenticator
- Received a Radius request with incompatible acceptance evidence
- Received an invalid Radius Authenticator
- Received an unexpected Radius Message-Authenticator
- Received encrypted TACACS+ packet for a client configured with 'secret none'
- Received encrypted TACACS+ packet for a server configured with 'obfuscation disabled'
- Received incomplete RADIUS UDP packet
- Received invalid encrypted TACACS+ packet or incorrect secret
- Received invalid TACACS+ packet
- Received unencrypted TACACS+ packet for a client with a configured shared secret
- Received unexpected TACACS+ authentication continue without pending state
- Recycling exclusive LDAP connection failed
- Recycling shared LDAP connection failed
- Refreshing client certificate verifier from directory
- Refusing to verify password: stored credential is unusable
- Registering SQLite pool in global registry
- Rejected TACACS+ frame exceeding configured max-packet-size
- Rejecting HTTP client connection: TCP not allowed
- Rejecting HTTP connection from an unknown source
- Rejecting HTTPS client connection: TLS not allowed
- Rejecting HTTPS connection from an unknown source
- Rejecting Management HTTP connection.
- Rejecting Management HTTPS connection.
- Rejecting non-TLS connection. Expecting TLS ClientHello byte 0x16
- Rejecting non-TLS TACACS+ connection. Expecting TLS ClientHello byte 0x16
- Rejecting proxied Radius TCP connection due to PROXY header error
- Rejecting proxied Radius TLS connection due to PROXY header error
- Rejecting proxied TACACS+ TCP connection due to PROXY header error
- Rejecting proxied TACACS+ TLS connection due to PROXY header error
- Rejecting Radius TCP client connection: protocol not allowed
- Rejecting Radius TCP connection by ip-accept list
- Rejecting Radius TCP connection from unknown client
- Rejecting Radius TLS client connection: protocol not allowed
- Rejecting Radius TLS connection because the client omitted required ALPN
- Rejecting Radius TLS connection by ip-accept list
- Rejecting Radius TLS connection from unknown client
- Rejecting Radius TLS connection with unsupported ALPN
- Rejecting TACACS+ TCP client connection due to ambiguous client selection
- Rejecting TACACS+ TCP connection by ip-accept list
- Rejecting TACACS+ TCP connection from unknown client
- Rejecting TACACS+ TLS client connection after certificate processing
- Rejecting TACACS+ TLS client connection due to ambiguous client selection
- Rejecting TACACS+ TLS connection by ip-accept list
- Rejecting TACACS+ TLS connection from unknown client
- Reloading AAA logger failed
- Reloading application loggers failed
- Removing Radius backend server offline connection
- Reply received without a finalized pending Radius request
- Request rejected because licensed maximum request count was reached
- Request rejected because the protocol is not licensed
- Responding 503 during shutdown
- Retrying failover server attempt
- Retrying LDAP search after connection failure
- Returning a RADIUS/1.1 resource-unavailable response because the reverse-request validation queue is full
- Reverse RADIUS @pre-client lookup failed; using static clients
- Reverse request received without a registered receiver
- Rotating AAA file logger before size-limited write failed
- Rotating AAA file logger failed
- Rotating AAA syslog overflow file logger failed
- Rotating application file logger before size-limited write failed
- Rotating application file logger failed
- Rotating application syslog overflow file logger failed
- RSA AM HTTP backend authentication returned an error
- SASL external LDAP bind failed
- Scheduled IpMap populate retry
- Scheduler tick task panicked
- Script runner handler channel closed unexpectedly
- Script runner handler failed unexpectedly
- Sending cache handler decoded-message reply failed
- Sending cache handler error reply failed
- Sending Radius Status-Server reply failed
- Sending Radius UDP response failed
- Sending RFC 5176 validation failure reply failed
- Sending status handler decoded-message reply failed
- Sending status handler error reply failed
- Server certificate accepted by AAA verification policy despite rustls rejection
- Server LDAP bind failed
- ServerStatusReceived for unknown connection
- Service not ok, ignoring packet
- Service not ok, rejecting HTTP connection
- Service not ok, rejecting HTTPS connection
- Session auth failed: session not found or expired
- Session auth failed: username mismatch between pipeline context and session store
- Session cleared by user
- Session created
- Session extended
- Setting failure rate violation for a backend
- Setting syslog TCP_NODELAY failed
- Skipping backend server while connection pool is recovering
- Skipping CRL directory refresh: previous refresh still running
- Skipping CRL file
- Staging RFC 5176 validation failure reply failed
- Starting NTLM auth process
- Status message handler failed unexpectedly
- Syslog format error
- Syslog write error
- TACACS+ @pre-client lookup failed, falling back to static clients
- TACACS+ connection closed after flushed reply
- TACACS+ connection closed due to an error
- TACACS+ connection closed due to frame error
- TACACS+ connection closed due to send error
- TACACS+ connection closed
- TACACS+ connection timed out
- TACACS+ packet type not handled
- TACACS+ server starting
- TACACS+ TCP connection rejected while service is not ready
- TACACS+ TLS connection handler failed
- TACACS+ TLS connection rejected while service is not ready
- TACACS+ TLS server starting
- Timer pipeline execution failed
- Timer pipeline panicked
- Timer tick skipped: previous run still in progress
- TLS handshake failed
- TLS handshake rejected by CRL
- TLS verification block not properly terminated. Missing accept; or reject; statement?
- UDP duplicate cache is at capacity
- UDP retransmission cache hit after the response transport closed
- UDP retransmission cache hit
- UDP retransmission is still in flight
- UDP socket receive error
- Unexpected RADIUS packet after request processing
- Unexpected RADIUS packet while dispatching reply
- Unexpected reply received over Radius backend server connection
- Unregistered SQLite pool from global registry
- Unsupported packet type
- Using jemalloc memory allocator
- Waiting for RADIUS TLS client handshake data timed out
- Waiting for TACACS+ TLS client connection data timed out
- Writing DSB to a capture file failed
- Writing to a capture file failed
- Wrote process identifier
Trace
- /live
- /ready(OK)
- AAA final pipeline result
- AAA main pipeline result
- AAA pipeline action
- AAA post-pipeline result
- AAA pre-pipeline result
- Accept
- Accepted legacy TACACS+ ENABLE request with minor version 1
- Added connection
- Additional EAP-TLS fragment received from peer
- Allowing Management HTTP connection while service is not ready
- Allowing Management HTTPS connection while service is not ready
- Applied RADIUS packet compatibility handling
- Attempting server LDAP bind
- Backend errored. Trying next backend.
- Client MAC computed
- Client MAC input buffer
- CMK derived
- Created LDAP TLS connection
- Creating new exclusive LDAP connection
- Creating new shared LDAP connection
- CRL directory snapshot unchanged
- Current IMSK (zeroes)
- Current IMSK
- Disconnected connection
- EAP error
- EAP message
- EAP-TLS empty request sent to peer
- EAP-TLS fragment ack received from peer
- EAP-TLS fragment received from peer
- EAP-TLS fragment sent to peer
- EAP-TLS message reassembled from peer
- EAP-TLS message sent to peer
- EAP-TTLS inner authentication complete
- EMSK derived
- EMSK S-IMCK extracted
- Error captured in try-action
- Error captured in until-action
- Failed to prepare UI settings file path
- Failed to resolve UI settings file path
- Failover server attempt failed
- Failover server attempt timed out
- HTTP backend error
- HTTP backend request details
- HTTP backend response details
- Ignore
- Ignoring a Radius TCP/TLS packet with an unknown Code
- Ignoring invalid terminal EAP carried by a RADIUS response
- Ignoring RADIUS backend frame with an unknown Code
- Ignoring terminal EAP result that does not match its RADIUS exchange
- IMSK source material
- JSON file reload request found no content changes
- Keying material ready
- LDAP bind request
- LDAP bind response
- LDAP search request
- LDAP search response
- Lua print output
- MSK derived
- MSK S-IMCK extracted
- New S-IMCK derived
- Next scheduled tick
- No config directory, returning empty pending status
- ntlm_auth request
- ntlm_auth response
- Parsed RADIUS datagram PROXY protocol header
- Parsed stream PROXY protocol header
- PEAP peer returned Result TLV Failure
- Previous S-IMCK
- RADIUS packet
- Read configuration file
- Received HTTP backend response
- Recycling exclusive LDAP connection
- Recycling shared LDAP connection
- Reject
- Removed stale disconnected connection
- Removed trailing NUL bytes from TACACS+ request arguments
- SASL external LDAP bind succeeded
- Sending HTTP backend request
- Server LDAP bind succeeded
- Server MAC computed
- Server MAC input buffer
- Session key seed as S-IMCK
- Skipping attribute with no type or vendor
- SLO recovery: all probes succeeded, transitioning to OK
- SLO recovery: probe failed, discarding accumulated probes
- SLO recovery: probe succeeded, holding backoff for next probe
- SLO: backend fully recovered
- TACACS+ packet
- TEAP outer TLVs received from peer
- Timer started
- TLS handshake complete
- TLS handshake starting
- TLS resumption rejected because EAP-TLS full authentication is required
- Unknown field in Yubico API response
- Using legacy dictionary lookup format
Navigation
Application log message index
Architecture Overview
Backend Load Balancing
Basic Installation
Built-in Environment Variables
Byte Size Units
Certificate Revocation Lists
Comparison Operators
Configuration Editor
Configuration Import and Export
Containers
Cron and interval timers
Data Types
Duration Units
Environment Variables
Execution Context
Execution Pipelines
Filters
Getting a Radiator License
Health check /live and /ready
High Availability and Load Balancing
High availability identifiers
HTTP Basic Authentication
Introduction
Linux systemd support
Local AAA Backends
Logging
Management API privilege levels
Namespaces
Password Hashing
Password Rehashing During Login
Probabilistic Sampling
Prometheus and OpenMetrics scraping
PROXY Protocol Support
Radiator server health and boot up logic
Radiator sizing
Radiator software releases
Radiator software security and dependency compliance
RadiatorDB
RadiatorDB Backup
RadiatorDB CLI
RadiatorDB Installation
RadiatorDB PostgreSQL 10k TPS example
RadiatorDB REST API
RadiatorDB sizing
Rate Limiting
Rate Limiting Algorithms
Reverse Dynamic Authorization
Service Level Objective
TACACS+ Authentication, Authorization, and Accounting
Template Rendering CLI
Timestamps
Tools radiator-client
TOTP/HOTP Authentication
What is Radiator?
YubiKey Authentication
YubiKey Context Variables
Navigation
Application log message index
Architecture Overview
Backend Load Balancing
Basic Installation
Built-in Environment Variables
Byte Size Units
Certificate Revocation Lists
Comparison Operators
Configuration Editor
Configuration Import and Export
Containers
Cron and interval timers
Data Types
Duration Units
Environment Variables
Execution Context
Execution Pipelines
Filters
Getting a Radiator License
Health check /live and /ready
High Availability and Load Balancing
High availability identifiers
HTTP Basic Authentication
Introduction
Linux systemd support
Local AAA Backends
Logging
Management API privilege levels
Namespaces
Password Hashing
Password Rehashing During Login
Probabilistic Sampling
Prometheus and OpenMetrics scraping
PROXY Protocol Support
Radiator server health and boot up logic
Radiator sizing
Radiator software releases
Radiator software security and dependency compliance
RadiatorDB
RadiatorDB Backup
RadiatorDB CLI
RadiatorDB Installation
RadiatorDB PostgreSQL 10k TPS example
RadiatorDB REST API
RadiatorDB sizing
Rate Limiting
Rate Limiting Algorithms
Reverse Dynamic Authorization
Service Level Objective
TACACS+ Authentication, Authorization, and Accounting
Template Rendering CLI
Timestamps
Tools radiator-client
TOTP/HOTP Authentication
What is Radiator?
YubiKey Authentication
YubiKey Context Variables